Development of fundamental technologies for domestic production of medical radioisotope (technetium-99m); The First and second phase report (FY2014-2020)

Project 6 Meeting Members for Tsukuba International Strategic Zone

JAEA-Review 2021-016, 102 Pages, 2021/11

JAEA-Review-2021-016.pdf:12.76MB

In December 2011, the Prime Minister designated Tsukuba and some areas in Ibaraki Prefecture as "Comprehensive Special Zones". In the Tsukuba International Strategic Zone, nine advanced research and development (R&D) projects are underway with the goal of promoting industrialization of life innovation and green innovation utilizing the science and technology in Tsukuba. In these projects, the domestic production of medical radioisotope (Technetium-99m, Tc) was certified as a new project in October 2013, and R&D have been performed in collaboration with related organizations with Japan Atomic Energy Agency (JAEA) as the project leader. Japan is the third largest consumer of molybdenum-99 (Mo) after the United States and Europe, and all Mo are imported. Supply will be insufficient if overseas reactors are shut down due to trouble or if transportation (air and land transportations) is stopped due to volcanic eruptions and some accidents. Thus, early domestic production of Mo is strongly required. This project is a technology development aimed at domestic production of Mo, which is a raw material of Tc used as a diagnostic agent. This report summarizes the activities carried out in the first and second phase of the domestic production of medical radioisotope (Tc) (here referred to as the "Project 6") in Tsukuba International Strategic Zone (FY2014-2020).

Inclination of self-interstitial dumbbells in molybdenum and tungsten; A First-principles study

Suzudo, Tomoaki; Tsuru, Tomohito

AIP Advances (Internet), 11(6), p.065012_1 - 065012_7, 2021/06

https://doi.org/10.1063/5.0048740

In the current study, we analyzed the self-interstitial atoms (SIAs) in BCC molybdenum (Mo) and tungsten (W) in comparison with other BCC transition metals utilizing first-principles method; particularly, we focused on uncommon dumbbells, whose direction are inclined from 111 toward 110 on the {110} plane. Such a direction is not stable neither in the group 5 BCC metals (i.e., vanadium, niobium, and tantalum) nor in -iron. Our first-principles relaxation simulations indicated that inclined dumbbells were more energetically-favored than common 111 dumbbells in Mo, while this is not necessarily the case for W. However, under a certain degree of lattice strain, such as shear or expansive strain, could make inclined dumbbells more favored also in W, suggesting that the lattice strain can substantially influence the migration barrier of SIAs in these metals because inclined dumbbells generally have a larger migration barrier than 111 dumbbells.

Two-step-pressurization method in pulsed electric current sintering of MoO for production of Tc radioactive isotope

Suematsu, Hisayuki*; Sato, Soma*; Nakayama, Tadachika*; Suzuki, Tatsuya*; Niihara, Koichi*; Nanko, Makoto*; Tsuchiya, Kunihiko

Journal of Asian Ceramic Societies (Internet), 8(4), p.1154 - 1161, 2020/12

https://doi.org/10.1080/21870764.2020.1824326

Pulsed electric current sintering of molybdenum trioxide (MoO) was carried out by one- and two-step pressuring methods for fabrication of irradiation target using production of Mo and Tc nuclear medicine. At 550C by the two-step pressurizing method, a relative density of 93.1% was obtained while, by the one-step pressurization method, the relative density was 76.9%. Direct sample temperature measurements were conducted by inserting a thermocouple in a punch. By the two-step pressurizing method, the sample temperature was higher than that by the one-step pressurizing method even almost the same die temperature. From voltage and current waveforms, it was thought that the conductivity of the sample increased by the two-step pressurizing method to increase the sample temperature and the relative density. The two-step pressurization method enables us to prepare dense targets at a low temperature from recycled and coarse-grained Mo enriched MoO powder.

Adsorption of platinum-group metals and molybdenum onto aluminum ferrocyanide in spent fuel solution

Onishi, Takashi; Sekioka, Ken*; Suto, Mitsuo*; Tanaka, Kosuke; Koyama, Shinichi; Inaba, Yusuke*; Takahashi, Hideharu*; Harigai, Miki*; Takeshita, Kenji*

Energy Procedia, 131, p.151 - 156, 2017/12

https://doi.org/10.1016/j.egypro.2017.09.421

no abstracts in English

Simulation study of sludge precipitation in spent fuel reprocessing

Takeuchi, Masayuki; Aihara, Haruka; Nakahara, Masaumi; Tanaka, Kotaro*

Procedia Chemistry, 21, p.182 - 189, 2016/12

BB2016-0225.pdf:0.61MB

https://doi.org/10.1016/j.proche.2016.10.026

A simulation technology with electrolyte thermodynamic model has been developed to evaluate the precipitation behavior in reprocessing solution based on nitric acid solution. The simulation results were compared with the experiment data from non-radioactive simulated HLLW with ten elements and Pu-Zr-Mo solution, and the reliability of the thermodynamic model was verified. Most of the precipitation species was zirconium molybdate hydrate from the both data. It is demonstrated that the chemical species and amount of the precipitation calculated by thermodynamic model reflected well that of experiments. This study has shown the thermodynamic simulation model is one of the useful tools to estimate the behavior of precipitation from the reprocessing solution.

The Sorption database of radionuclides for cementitious materials

Kato, Hiroshige*; Mine, Tatsuya*; Mihara, Morihiro; Oi, Takao; Honda, Akira

JNC TN8400 2001-029, 63 Pages, 2002/01

JNC-TN8400-2001-029.pdf:1.81MB

Cementitious materials will be used for the TRU waste repository as a component of engineered barrier system. The distribution coefficients which represent the retardation of radionuclides migration for the cementitious materials would be one of the important parameter for the safety assessment. The much information of radionuclide sorption onto the cementitious materials has been accumulated through the study in the world. Therefore it is necessary to compile the information and Kd of the radionuclides reported in previous studies. In this report, the Kd of the important radionuclides, such as C, Ni, Se, Sr, Zr, Nb, Mo, Tc, Sn, I, Cs, Sm, Pb, Ra, Ac, Th, Pa, U, Np, Pu, Am, Cm, for the cementitious materials were compiled as the Sorption Database (SDB). For radionuclides to be sensitive to the redox potential, e.g. Se, Tc, Pa, U, Pu and Np, some Kds measured under the controlled atmosphere had been reported, and few Kds measured under the controlled redox potential had been reported. For Se, Mo, Sm, Cm and Ac, the distribution coefficients had not been reported, therefore distribution coefficients of Se and Mo for OPC (Ordinary Portland Cement) pastes were measured by batch sorption experiments and these data were added into the SDB.

A Study on modeling and numerical simulation of extraction in the CMPO-TBP system

; ;

JNC TN8400 2001-022, 60 Pages, 2001/03

JNC-TN8400-2001-022.pdf:1.31MB

A numerical simulation code for the TRUEX (Transuranium Extraction) process was developed. Concentration profiles of americium and europium were calculated for some experiments of the counter current extraction system those were carried out in CPF (Chemical Processing Facility) by using the code. Calculation profiles were in agreement with the experimental results. Operational conditions were also examinted for the americium recovery experiment by the TRUEX process carried out in the Plutonium Fuel Center. It was shown that lowering the concentration of nitric acid in the scrub solution and decreasing the flow rate of solvent and strip solution was effective for improving the performance of the stripping step and reducing the volume of the waste solution. In order to find the optimum conditions for various experiments, this simulation code was modified to calculate the concentration profiles of other metal elements such as zirconium and iron and the effect of oxalic acid on the extraction behavior of the metal elements. The calculated concentration profiles of americium and europium were varied by this modification. In the experiment at CPF, the calculations were carried out to obtain recovery ratio of americium in the product stream with the amount of oxalic acid added to the process. This calculation result showed that it was possible to improve the performance of decontamination of fission products by increasing oxalic acid concentration added to the process. The calculation was also carried out for finding the optimum conditions of oxalic acid concentration added to the europium recovery process.

Ultra-High temperature strength properties on Mod.9Cr-1Mo steel

; Yoshida, Eiichi; Aoto, Kazumi

JNC TN9400 2000-042, 112 Pages, 2000/03

JNC-TN9400-2000-042.pdf:8.55MB

A sodium-water reaction drove from the single tube break in steam generator of FBR might overheat labor tubes rapidly under internal pressure loadings. lf the temperature of tube wall becomes too high, it has to be evaluated that the stress of tube does not exceed the material strength limit to prevent the propagation of tube rupture. This study clarified the tensile and creep properties of Mod.9Cr-1Mo steel at ultra-high temperature which will be used in evaluation of the tube burst by sodium-water reaction. The strain rates for tensile test are from 10%/min to 10%/sec, and creep-rupture time is maximum 277sec. The range of test temperature is 700C to 1300C. The main results obtained were as follows; (1)The evaluation data on the relationship between tensile strength and strain rate and creep-rupture strength in shorter time on Mod.9Cr-1Mo steel were acquired. (2)Short-term mechanical properties of Mod.9Cr-1Mo steel were evaluated based on the results of tensile and creep-rupture tests up to 1300C. As a result of the evaluation, recommended equation of creep-rupture strength in the short-term was proposed. (3)Tensile and creep-rupture strength of Mod.9Cr-1Mo steel tube showed the value which was higher than the 2 1/4Cr-1Mo steel, and it was proven to have the superior properties.

Study on the nuclide behavior in nuclear fuel recycling system

Fujii, Toshiyuki*; *

JNC TJ9400 2000-003, 36 Pages, 2000/02

JNC-TJ9400-2000-003.pdf:1.36MB

For establishing a recycling system based on low-decontamination, the distribution behaviors of radionuclides in the process are essential information for the design of the system. Molybdenum and palladium are less radioactive fission products, but attention should be paid to them because they are likely to extremely affect the performance of the recycled fuels. In this context, in this study, the extraction behaviors of molybdenum and palladium under conditions of PUREX and TRUEX extraction process were experimentally studied, and their chemical mechanisms were discussed. In cojunction with the extraction experiments, absorption spectrometry was applied to identify the related species and the extraction mechanism. As a result, knowledge for the distribution characteristics of molybdenum and palladium in PUREX and TRUEX process was reinforced.

Neutron irradiation test of optical components for fusion reactor

Ishitsuka, Etsuo; Sagawa, Hisashi; Nagashima, Akira; Sugie, Tatsuo; Nishitani, Takeo; Yamamoto, Shin; Kawamura, Hiroshi

Effects of Radiation on Materials (ASTM STP 1366), p.1176 - 1185, 2000/00

no abstracts in English